NC Lathe Frame
Home > Products > NC Lathe Frame > 45°Turning & Grinding Centre(Double Spindle Single Turret Single Head) GP-500STRM

45°Turning & Grinding Centre(Double Spindle Single Turret Single Head) GP-500STRM

Product Drawings

ItemS i z eGP-500STRM
Working rangeMax.Turning diameter over bedφ680
Max.Turning swing dia.over carriageφ400
Max.Turing diameterφ250(When the X-axis and headstock are protected as a whole)
Max.length between chuck and tailstock center679
Max.Length between both Chucks665
Max.Turning &Grinding length500
Max.X/Z axis travX1/X3/X5 axis230/160/350
Z1/Z3 axis680/680
Max.Taiistock travel680
Feed screwControlaxis9Axis(X1+X3+X5+Z1+Z3+Z5+C1+C2+C3)
X1/X3axis ball-screw3210-C3
(N·m)Recommend theX1/X3axis motor torque>10
X5 axis ball-screw4010-C3
(N·m)Recommend theX5 axis motor torque>15
Tailstock ball-screw3208-C3
(N·m)Recommend theY1/Y3axis motor torque>10
Tailstock ball-screw4010-C3
(N·m)Recommend talstock motor torque>15
BEDBed slant angle45° Integral cast bed
Linear guide's span400
Spindle(rpm)Max.spindle speedmain 4500,back4500
Spindle through-hole diametermain:φ61,back:φ56
Spindle nose size   main:A2-6,back:A2-5
(kW)Recommend the spindle motor power   main:7.5,back:5.5
Hydraulic chuck or collet chuck   main:8 inch,back:6 inch
Hydraulic TailstockDiameter of Tallstock center sleeveφ60
Max.stroke of Tailstock center sleeve200
Taper of Tailstock center sleeveMT4


Related Products


          

          
        
WeChat
WeChat