NC Lathe Frame
Home > Products > NC Lathe Frame > 45° Turning and Grinding Centre (Double Spindle Single Turret Double Y-axis Single Grinding Head) GP-500STRYM

45° Turning and Grinding Centre (Double Spindle Single Turret Double Y-axis Single Grinding Head) GP-500STRYM

Product Drawings

 l t emsizeGP-500STRYM
Working rangeMax.Turning diameter over bedφ680
Max.Turning swing dia.over carriageφ380
Max.Turing diameterφ250(When the X-axis, Y-axis and the headstock are protected as a whole.)
Max.length between chuck and tailstock cente679
Max.Length between both Chucks665
Max.Turning &Grinding length500
Max.X/Z axis tX1/X3/X5 axis230/160/350
Y1/Y3 axis120/120
Z1/Z3 axis680/680
Max.Talstocktravel680
  Feed screwControl axis11Axis(X1+X3+X5+Y1+Y3+Z1+Z3+Z5+C1+C2+C3)
X1/X3axis ball-screw3210-C3
(N·m)Recommend theX1/X3axis motor torque>10
X5 axis ball-screw4010-C3
(N·m)Recommend the X5 axis motor torque>15
Y1/Y3 Ball Screws3208-C3
Recommended torque for Y1/Y3 axis motors(N·m)>10
Tailstock ball-screw4010-C3
(N·m)Recommend talstock motor torque>15
BEDBed slant angle45° Integral cast bed
Linear guide's span400
Spindle(pm)Max.spindle speed main 4500,back450
Spindle through-hole diametermain:φ61,back:φ56
Spindle nose size main:A2-6,back:A2-5
(KW)Recommend the spindle motor powermain:7.5,back:5.5
Hydraulic chuck or collet chuckmain:8 inch,back.6 inch
Hydraulic TailstockDiameter of Tailstock center sleeveφ60
Max.stroke of Tallstock center sleeve200
Taper of Tallstock center sleeveMT4


Related Products


          

          
        
WeChat
WeChat